LIGHT DUTY INDUSTRIAL CORROSION PROTECTION SYSTEMS
Description
High chemical and mechanical resistance system. Solvent free, coloured epoxy compound providing a smooth or anti slip durable topping.
Uses
Designed for use in high chemical environments such as acid and alkali bund areas, storage tanks, silos, sewage works, battery charging bays, chemical loading bays and other areas where conventional epoxy systems are unsuitable. Not suitable for direct contact with food and beverages.
Benefits
- High chemical resistance – HCR
- Solvent free – safe to apply – odourless
- Extremely good mechanical properties
- Seamless
- Liquid proof
- Hard wearing – abrasion resistant
- Self smoothing or anti slip available
Product Data Sheet
Description
High chemical and mechanical resistance system. Solvent free, coloured epoxy compound providing a smooth or anti slip durable topping.
Uses
For use in high chemical environments such as storage tanks, silos, battery charging bays, sewage works, acid and alkali bund areas, chemical loading areas. Also used as a laminating resin with glass fibre.
Benefits
- High chemical resistance – CR
- Solvent free – safe to apply – odourless
- Extremely good mechanical properties
- Seamless
- Liquid proof
- Hard wearing – abrasion resistant
- Self-smoothing or anti slip available
Product Data Sheet
Description
Clear solvent free novolac modified epoxy resin system with high chemical and mechanical resistance.
Uses
Designed for use in high chemical environments such as acid and alkali bund areas, storage tanks, silos, sewage works, battery charging bays, chemical loading bays and other areas where conventional epoxy systems are unsuitable. Also used as a bedding and grouting compound for acid tiles and bricks as well as a laminating resin.
Benefits
- High chemical resistance – Novolac technology
- Solvent free – safe to apply – odourless
- Extremely good mechanical properties
- Seamless
- Liquid proof
- Hard wearing – abrasion resistant
- Self smoothing or anti slip available
Product Data Sheet
Description
Vuka Prime 103 is a medium viscosity, moisture tolerant epoxy compound with high chemical resistance.
Uses
As a primer, pore sealer and adhesion promoter on prepared concrete or grano screeds. Can be used as an epoxy screed. In areas subject to attack by acetic acid, lactic acid and sugars such food and beverage factories.
Benefits
- Cures at low temperatures
- Cures under damp, humid conditions
- Withstands water, chemical & solvent immersion
- Solvent free, no VOC
- Flexible & impact resistant
- Versatile – can be used as a laminate or screed
Product Data Sheet
Description
Vuka Resist 340 is a multi-component solvent free epoxy resin system. It has excellent chemical resistance and low vapour transmission.
Uses
Tank linings for concrete and steel with glass fibre. Protection of steel and concrete surface from chemical corrosion. Waterproofing and protection of polystyrene foam.
Benefits
- Solvent free
- Non-tainting, quick curing
- Monolithic seamless finish
- High abrasion and impact resistant
- Easy to clean and sterilise
- Resistant to a broad range of chemicals
Product Data Sheet
Description
An epoxy coating utilising FDA compliant resins for coatings in contact with food, potable water or alcoholic beverages containing up to 15% alcohol by volume.
Uses
- Protection of concrete storage tanks.
- Protection of food storage tanks.
- Potable water and brewery tank linings up to 15% alcohol by volume.
Benefits
- Solvent free
- Non-tainting, quick curing
- Food safe
- Monolithic seamless finish
- High abrasion and impact resistant
- Easy to clean and sterilise
- Resistant to a broad range of chemicals
Product Data Sheet
HEAVY DUTY INDUSTRIAL CORROSION PROTECTION SYSTEMS
Description
This lining is intended for the protection of concrete and steel and is based on specialist synthetic resins strengthened with a fibre glass membrane and a resin rich surface veil. The reinforcement helps to modify expansion and contraction properties of the lining to more closely match that of the substrate. This allows the system to operate at elevated temperatures and under fluctuating thermal conditions. The system is designed to withstand physical abuse, impact damage as well as bridge cracks in concrete. Resist E-1 is engineered to provide maximum chemical resistance and will withstand 98% sulphuric acid.
Product Data Sheet
Description
This lining is intended primarily for the protection of concrete and is based on specialist synthetic resins strengthened with a fibre glass membrane and a surface veil. The reinforcement helps to modify expansion and contraction properties of the lining to more closely match that of the substrate. This allows the system to operate at elevated temperatures and under fluctuating thermal conditions. The system is designed to withstand physical abuse, impact damage as well as bridging hairline cracks in concrete. Resist E-2 is engineered to provide maximum chemical resistance and will withstand 98% sulphuric acid.
Product Data Sheet
Description
This lining is intended for the protection of either concrete or steel and is based on specialist synthetic resins strengthened with a fiberglass membrane and a resin rich surface veil. The reinforcement helps to modify expansion and contraction properties of the lining to more closely match that of the substrate. This allows the system to operate at elevated temperatures and under fluctuating thermal conditions. The system is designed to withstand physical abuse, impact damage as well as bridge cracks in concrete. Resist N-1 has a high heat distortion temperature of 100˚C and exceptional chemical resistance, particularly towards chlorine containing media and organic solvents.
Product Data Sheet
Description
This lining is intended primarily for the protection of concrete and is based on specialist synthetic resins strengthened with a fibre glass membrane and a surface veil. The reinforcement helps to modify expansion and contraction properties of the lining to more closely match that of the substrate. This allows the system to operate at elevated temperatures and under fluctuating thermal conditions. The system is designed to withstand physical abuse, impact damage as well as bridge hairline cracks in concrete.
Resist N-2 has a high heat distortion temperature of 100˚C and exceptional chemical resistance, particularly towards chlorine containing media and organic solvents.
Product Data Sheet
Description
This lining is intended for the protection of either concrete or steel and is based on specialist synthetic resins strengthened with a fiberglass membrane and a resin rich surface veil. The reinforcement helps to modify expansion and contraction properties of the lining to more closely match that of the substrate. This allows the system to operate at elevated temperatures and under fluctuating thermal conditions. The system is designed to withstand physical abuse, impact damage as well as bridge cracks in concrete. Resist V-1 is engineered to provide maximum chemical resistance.
Product Data Sheet
Description
This lining is intended primarily for the protection of concrete and is based on specialist synthetic resins strengthened with a fibre glass membrane and a surface veil. The reinforcement helps to modify expansion and contraction properties of the lining to more closely match that of the substrate. This allows the system to operate at elevated temperatures and under fluctuating thermal conditions. The system is designed to withstand physical abuse, impact damage as well as bridge hairline cracks in concrete. Resist V-2 is engineered to provide maximum chemical resistance.
Product Data Sheet
Description
Vuka Crete HD is a multi-component, water based polyurethane compound incorporating antimicrobial technology for industries requiring high strength, heavy duty chemical resistant floors. Trowel applied at between 6mm and 9mm thickness.
Uses
Typically specified for aggressive chemical environments, abattoirs, dairies, food & beverage plants, workshops, warehouses, prisons, kitchens and the like.
Benefits
- Fast track – can be applied on 7 day old concrete
- Non-tainting, quick curing
- Monolithic seamless finish
- High abrasion and impact resistant
- Resistant to a broad spectrum of chemicals
- Anti-slip surface
- Anti-microbial technology
- Standard colour range
- Heat resistant 9mm to 120˚C
- Can tolerate steam cleaning
Product Data Sheet