Description
Vuka Prime 101 is a multi component solvent borne epoxy primer system.
Uses
As a primer and adhesion promoter on prepared:
- Concrete
- Grano screeds
- Existing resin coatings
- Plastered renders
Benefits
- Strengthens cementitious surfaces
- Excellent penetration
- Economical floor sealer
- Enhances bond of coating systems
- Easily applied by roller
- Long pot life
Product Data Sheet
Description
Vuka Prime 102 is a clear unfilled multi component low viscosity solvent free epoxy primer.
Uses
- As a primer and adhesion promoter on prepared Concrete and Grano screeds.
- As a clear sealer for the commercial and retail sector in offices and outlets.
Benefits
- Good penetration – low viscosity
- Minimises out gassing on substrates – seals pores High bond strength
- Short overcoat time
- Multipurpose system
- Primer for most synthetic resin systems
Product Data Sheet
Description
Vuka Prime 103 is a medium viscosity, moisture tolerant epoxy compound with high chemical resistance.
Uses
- As a primer, pore sealer and adhesion promoter on prepared concrete or grano screeds.
- Can be used as an epoxy screed.
- In areas subject to attack by acetic acid, lactic acid and sugars such food and beverage factories.
Benefits
- Cures at low temperatures
- Cures under damp, humid conditions
- Withstands water, chemical & solvent immersion
- Solvent free, no VOC
- Flexible & impact resistant
- Versatile – can be used as a laminate or screed
Product Data Sheet
Description
Vuka Prime 104 is a solvent free epoxy resin liquid applied as a surface damp proof membrane to control the passing of moisture vapour from concrete surfaces and allow the quick application of synthetic resin impermeable coatings and screeds.
Uses
Allows the installation of moisture sensitive floor finishes as early as 5 days after concrete has been placed.
Benefits
- Permits early overlaying with vinyl’s, carpets and resin coatings without the normal 3 week drying out period being observed
- Impervious to water
- Slows and controls vapour transmission
- Solvent free, low odour
- Good adhesion to concrete and screeds
Product Data Sheet
Description
Vuka Prime 105 is a multi-component epoxy, cementitious textured compound installed between 1.5mm to 4mm thickness. This self- smoothing composite provides a surface membrane for water containment in concrete.
Uses
As a surface-based Damp Proof Membrane when installed at 3mm. Used as a base layer beneath coatings, screeds, carpets and wooden flooring to allow early installation of these finishes.
Benefits
- Self-smoothing and solvent-free
- Excellent adhesion to green/damp concrete
- Pore filling properties
- Allows fast-track applications
- Can be over-coated within 24hrs
- Prevents osmotic blistering of resin coatings over damp substrates
- Impervious to liquids but permeable to water vapour
- Early mechanical strengths
- Surface underlayment for smooth synthetic resin finishes
Product Data Sheet
Description
Vuka Prime 105 F is a multi-component epoxy, cementitious fine textured thixotropic micro mortar compound. This self-smoothing and finishing compound is ideal for concrete, mortar and stone.
Uses
Used as a levelling layer 1.5 to 3mm on vertical or horizontal surfaces. Over high moisture content sub bases or green concrete. In aggressive chemical environments. Surface sealing and finishing.
Benefits
- Self smoothing and solvent free
- Excellent adhesion to green/damp concrete
- Pore filling properties
- Allows fast track applications
- Can be over coated within 24hrs
- Prevents osmotic blistering of resin coatings over damp substrates
- Impervious to liquids but permeable to water vapour, suitable for moisture control
- Very good mechanical strength
- Surface underlayment for smooth synthetic resin finishes
- Passivity preservation and resistivity increasing properties
- Internal and external use
Product Data Sheet